![](https://www.weicon.ch/media/e1/ef/20/1721130090/Header%20Flach-%20und%20Rundkabelmesser.png)
Cable stripper for all purposes
Weicon Tools Flat and Round Cable Stripper
The
tool manufacturer Weicon Tools has developed a universal cable stripper that
can be used to work on both flat cables and round cables – the Weicon Tools Flat
and Round Cable Stripper.
Universal cable stripper
The
tool can be used to strip all common flat and round cables quickly, precisely
and safely. It was designed for
flat cables up to a width of 18 mm and for round cables with a diameter of 6 to
13 mm.
For circular and longitudinal cuts
Owing
to the guide at the head of the tool, longitudinal cuts are very easy to
perform – especially for longer sections. The longitudinal cuts can be made on
both flat and round cables. Below the cable guide is a rotatable inner blade.
As with all Weicon Tools cable strippers, the blades can be used to make both
circular and longitudinal cuts on round cables (from 6 to 13 mm) in a single
step.
Precise blade adjustment
With a lockable adjusting screw, the depth of the blade can be comfortably and precisely set in steps of 0.1 mm up to 3 mm. This prevents damage to deeper layers. Two more blades have been added to the base of this handy tool. These are used for parallel cuts on the outer sheath or insulation. This means that the outer sheath can be easily removed even in very narrow spaces, such as in junction boxes or cable ducts.
Special design and additional stripping function
The
special design allows the stripping of longer sections at both the head and
base of the tool. Flat cables up to a width of 18 mm and round cables up to 13
mm in diameter can easily be guided through the tool.
An additional stripping function has been integrated in the lower side of the housing. This can be used to strip all common flexible and solid conductors with a cross-section between 0.5 and 6 square millimetres.
Ergonomics and safety
In
the development of the tool, great attention was paid to a safe and ergonomic
design and to user friendliness. The ergonomic, non-slip design of the handle
and the grip zones ensure both safe handling and fatigue-free work even over longer
periods of time. Since the blades are located inside the tool, the risk of
injury is significantly reduced.
Made in Germany
As
is usual with Weicon Tools, the cable stripper was developed and manufactured
entirely in Germany. The tools – made of robust glass fibre-reinforced
polyamide – are produced in Ascheberg, Westphalia, and the steel for the
electrogalvanised blades is from Solingen. The tool is 160 mm long, weighs 125
grammes and is supplied in a recyclable cardboard packaging.
454
words
62 rows
2579 signs (incl. blanks)